Sink faucets that are installed in washrooms and the kitchen are usually very heavy-use fixtures and over a period of time are likely to spring a leak or even break down. The internal parts are made of rubber and tend to wear out. The o-rings and the washers are the first ones to go, the seats come next and in some cases the stem may need replacement as well. The resultant leaks may come from the joints and the water will leak out onto the counter. If you do not feel you can do this type of repair yourself, call the top rated plumbers on DeKalb County, GA for help.

Do Not Delay Sink and Faucet Repairs

Most people tend to postpone fixing a leaky faucet. But that is a definite waste of water and today it is more important than ever to do our bit for the environment. Apart from this, it’s always the hot water tap that tends to leak sooner than the cold water one. This is because the hot water affects the rubber washer and it wears out faster. A leaking faucet indirectly adds to your energy costs as well.

Top faucet brands available in DeKalb County, GA include Kohler, Delta, Danze, Moen.

How To Repair A Leaky Faucet

A simple leaky faucet does not need any specialized handling and you can easily fix it yourself using the following steps:

• Detach the cap from the faucet and remove the handle as well. The top cap can be pried off easily from the handle with any screwdriver. Now unscrew the screws that hold the handle down and take it off the faucet. The packing nut can be unscrewed with an adjustable wrench.

• Now pull the stem away from the body of the faucet with needle nose pliers. You will see the seat washer (rubber disk) right below the stem. Now unscrew the brass screw and remove the seat washer from its place.

• Before you replace the washer just file the stem a little. Smooth out all the protruding edges that you see.

• Now fix the brass screw back in place.

• Reassemble the handle as well as the cap. Insert the handle into the faucet and secure it in place with the original screws. Place the decorative cap on top and fix it firmly into the handle piece.

This is a simple job but there might be times when you do not have the tools or the time to attend to it. Call in a plumber and get the job done. Fixing a leaky faucet or replacing a sink will take just about an hour to fix.

Article Source:

Being more green and more energy efficient used to be such a foreign thing for most people in DeKalb County, GA . Over the last few years, it really has become the norm. A few years back, a tankless water heater used to be a luxury item until the manufacturers got smart and made them affordable enough to be in every home in DeKalb County, GA . Now, tankless water heaters are more popular than ever and saving a ton of people a lot of money.

Tankless Water Heater Reviews

Before you go out and spend a lot of money on a tankless water heater, you will need to do a little bit of research. There are many different companies with different quality units. So if you can spend just a little bit more time upfront, it will definitely save you a lot of money over the long run. Please keep in mind that most homes with a tankless water heater save around 40% on their energy bills. That savings is huge. The unit should be able to pay for itself within the first 2-3 years. Most of the big manufacturers state that you can expect the unit to last up to 20 years.

To choose which one is best for you, you will need to answer a couple questions.

1. Fuel Type – Propane, Electric or Natural Gas.

2. Determine the number of plumbing fixtures in the home.

Tankless Water Heater Manufacturers

There are many manufacturers out there to choose from. When deciding on which manufacturer you want to go with, you need to see what type of features and warranty’s that they offer. The last thing you would ever want is to not have a manufacturer’s warranty on your unit. I would not trust any company that doesn’t believe in their product enough to offer that.

The two companies that I would recommend most for multiple reasons are Rheem and Rinnai. Both are extremely trustworthy and have an incredible reputation. There are others that this plumbing contractor also feels are high quality but those would be the top two that are would recommend. Rheem has been around since the 1920’s and they are known as pioneers in the industry. Rinnai has also been around since the 1920’s and have been leaders in heating water since the 1960’s.


Remember to follow a few of the steps that are listed above and a DeKalb County, GA homeowner should be able to find a very affordable and high quality unit. By reading just a few tankless water heater reviews, you will know what you need to and make a good decision.

Article Source:

A leak in the plumbing is a common home problem. Leaks can be the result of a burst pipe, cracked pipe, leaking faucet or shower head, and more. When you have a leak that requires the services of a plumber, it is essential that you stop it right away before the water causes damage to the home or causes a drastic increase to your water bill. Only then should you call a plumber in DeKalb County, GA .

The following is a guide on stopping a leak until the plumber arrives to fix it:

Once you detect a water leak, the first thing you should do is turn off the main water valve. This will stop the water from continuing to leak and causing more of a mess. The main water valve is located near the water meter. Once you have turned off the main water valve, open the faucet to allow the pressure to decrease. The remaining water in the pipes will flow through and once there is no more water pressure, there will be no pressure to push any remaining water through the damaged pipe or damaged plumbing fixture.

Once you have successfully stopped the water leak, contact the plumber. If the pipe leak is small enough, there are measures you can take to temporary stop the leak until the plumber arrives to fix it. The following is a guide on temporary fixing leaky pipes:

Epoxy: You can use epoxy to stop a leaky pipe. It is effective for sealing leaks at pipe fittings and joint fittings. Make sure the water has drained and the area is dry before sealing the leak. Also, you should clean it with steel wool. Use plenty of epoxy and then wait for it to cure.

Duct Tape or Electrical Tape: You can temporarily stop a pipe leak by wrapping electrical tape and duct tape around the crack in the pipe. Make sure the pipe is drained and dry and then wrap it tight around the pipe until the leak is completely covered. Make sure that you start wrapping a few inches away from the leak and then continue down the pipe until you are 2 inches past the leak to ensure you have adequately covered the leak. It should be wrapped a few times and make sure that each wrap is completely tight.

Pipe Clamp: To fix a big crack, get a pipe clamp and a piece of bicycle tire tubing. First, cut the tube so that it is big enough to fit around the crack causing the leak. Take a pipe clamp and secure the tube around the leak. The tube will contain the leak until the plumber arrives.

C-Clamp and Blocks: First, place a rubber pad over the leak area. Then, place a small wooden strip on top of it. Use the c-clamp to hold it all in place. The wooden strip will protect the pipe from the pressure of the c-clamp.

These repairs might stop a leak for a few days, but it is essential that you contact a professional plumber who will be able to permanently fix the leak.

Article Source: